Tesa Fencing

Tesa Fencing was formed to fill the need to locally manufacture palisade security fencing in Zimbabwe. Their aim is to provide a top quality fence for both domestic and industrial use that not only provides high security but that is also aesthetically pleasing to look at.

*They specialize in 1.2m, 1.5m, 1.8 and 2.1 m high fences.

They can also make heights as per customer request. Standard panel sizes range between 2m and 2.5m spans. The span can also be made according to customer request.

*Numerous Factors can influence the design and width of panels at an installation:

*Terrain; Distance between surround points; Location of entry/exit point; required height; optimal structure; Specified/desired style.

*Standard Pale gaps are 115mm (1600mm between centres) and 100mm (145mm between centres). Smaller gaps between pales can be manufactured to suit customer requirements. Fencing Panels consists of 2 horizontal cross members (or 3 cross members for fencing higher than 2.0m) which are punched with a profiled slot which allow the vertical pales to be slid through the cross member and then crimped into place (therefore no welding on the panels).

*Pales and cross members are made of Z275 Pre-Galvanized material and are not painted. This makes the palisade fencing maintenance free.

*Posts are made of Black Steel, they can be painted or hot dipped galvanized. Tesa prefer to paint in order to break the galvanized colour.

*Over hang on posts can be manufactured if razor wire or electrification is required. Tesa also manufacture sliding and swing gates to match up to the fence.


Posts are planted in 450 x 450 x 600mm deep with 15 to 20 Mpa concrete foundations as per local council by law. Assembled panels are installed by: Securing brackets and spacers to panel cross members with M8x40mm cup square and M8 shear nut. Locating panels, bracket, spacer against a predrilled post and sliding on an M8x90mm cup square through the bracket and the post. Once panels and cross members have been secured, shear nuts are sheared off preventing vandalism through disassembly.


Leave a Reply

Your email address will not be published. Required fields are marked *